General specifications | |
---|---|
Signal type | Analog input |
Supply | |
Connection | Power Rail or terminals 23+, 24- |
Rated voltage | 19 ... 30 V DC |
Rated current | approx. 130 mA at 24 V DC |
Power dissipation | 2.5 W |
Power consumption | 3.1 W |
HART signal channels (intrinsically safe) | |
Conformity | HART field device input (revision 5 to 7) |
Interface | |
Programming interface | programming socket |
Input | |
Connection side | field side |
Connection | terminals 1, 2, 3, 4, 5, 6 |
Open circuit voltage/short-circuit current | typ. 24 V / 28 mA |
Input resistance | 250 ? , 5% (terminals 2, 3 and with jumper on 5, 6) |
Available voltage | ? 15.5 V at 20 mA, short-circuit protected |
Output | |
Connection side | control side |
Connection | output I: terminals 10, 11, 12, output II: terminals 16, 17, 18 output III: terminals 7, 8, 9, output IV: terminals 13, 14, 15, output V: terminals 19, 20, 21 |
Output I, II | |
Output III, IV, V | |
Other outputs | HART communicator on terminals 22, 24 |
Collective error message | Power Rail and LED red |
Transfer characteristics | |
Output III, IV, V | |
Relay | programmable either for fault or trip value (with direction, hysteresis and delay) |
Galvanic isolation | |
Output I/II | functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff |
Output I, II/other circuits | reinforced insulation acc. to IEC62103, rated insulation voltage 300 Vrms |
Output III/IV/V/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
Indicators/settings | |
Display elements | LEDs , display |
Control elements | Control panel |
Configuration | via operating buttons via PACTware |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Low voltage | |
Conformity | |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC 60529:2001 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | 300 g |
Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | BASEEFA 07 ATEX 0174 |
Supply | |